Posted: February 27th, 2021

# Ensc 324 | Electrical Engineering homework help

ENSC 324 HOMEWORK #2 Fall 2015 DUE: Monday, November 9 at 2 PM Please note that unless you show work in the derivations and solutions you will get no credit for the answers. Obviously copied answers from study partners or other sources, etc., will also receive no credit. Please do all parts of all six problems. You may want to make a copy of your homework in case it cannot be returned before Exam 3 (solutions will be provided). Problem #1 An abrupt silicon pn junction at zero bias and T=300K has dopant concentrations of NA = 2×1016/cm3 and ND = 1×1016/cm3 . a) Calculate the Fermi level on each side of the junction with respect to the intrinsic Fermi level. b) Sketch the equilibrium energy band diagram for the junction and determine Vbi from the diagram and the results of part a). c) Now calculate Vbi using Equation (7.10) and compare to the result found in part b). d) Determine xn, xp and the peak electric field for this junction. e) Show how the energy band diagram will change (qualitatively) under both forward and reverse bias on a duplicate of the sketch obtained in part b). What will happen (qualitatively) to the results found in part d) for both forward and reverse bias? Problem #2 We are going to design a GaAs pn junction to meet some certain specifications. The diode is at 300K with a crosssectional area of 10-4 cm2 . At a reverse bias of 4V, we want 20% of the total space charge region width to lie in the p-region and the total junction capacitance to be 0.6 pF. Determine a reasonable set of ND, NA, Vbi, and W to make this diode meet specification. Problem #3 An abrupt silicon pn junction at T=300K under equilibrium conditions has a p-side doping of of NA = 3×1015/cm3 and an n-side doping of ND = 2×1015/cm3 . (i)Compute: a) Vbi b) xn, xp, and W c) the electric field at x=0 d) the voltage at x=0 (ii) Sketch the following as a function of position: a) charge density, b) electric field, electrostatic potential. (iii) Repeat parts (i) and (ii) if everything is kept the same except of NA = 1017/cm3 . Problem #4 An abrupt silicon pn junction diode is to be designed to operate at T = 300K such that the diode current is I = 10 mA at a forward biased diode voltage of 0.75V. The ratio of electron current to hole current is to be 0.1 and the maximum current density is to be no more than 20 A/cm2 . Use the following parameters: NA = ND = 1016/cm3 , Dn = 25 cm2 /s, Dp = 10 cm2 /s, τp0 = τn0 = 0.5 µs, εr = 11.7. Problem #5 A symmetrically doped abrupt silicon pn junction has doping concentration of NA = ND = 5×1016/cm3 . If the peak electric field of in the junction at breakdown is 4 × 105 V/cm, determine the breakdown voltage of the junction. Problem #6 A silicon pn junction diode at T=300K has the following parameters: NA = 5 × 1016 /cm3 , ND = 1 × 1016 /cm3 , Dn = 25 cm2 /s, Dp = 10 cm2 /s, ni = 1.5 × 1010 /cm3 , τn0 = 5 × 10-7 s, τp0 = 1 × 10-7 s, A = 10-3 cm2 . The forward bias voltage is 0.625 V. Find: a) the minority electron diffusion current at the space charge edge; b) the minority hole current at the space charge edge; c) the total current in the pn junction. d) the electron and hole currents at x = xn, x = xn + Lp, and x = xn + 10Lp.

### Expert paper writers are just a few clicks away

Place an order in 3 easy steps. Takes less than 5 mins.

## Calculate the price of your order

You will get a personal manager and a discount.
We'll send you the first draft for approval by at
Total price:
\$0.00